The American Gym
You can find these and many more gym related products here! Pick a category and check out our wide selection.
    Search Store Contact Us
Uneven Bars Balance Beams Vault Pommel Men's Bars Rings Misc. Equip Used Equipment Hardware

Uneven Bars
Balance Beams
Vault
Pommel Horse
Men's Bars
Rings
Preschool
Miscellaneous Equipment
Gym Trampolines
Request a Quote
Quote Entire Gym


 

 

 

Gymnastics Equipment

Home » Gymnastics » Uneven Bars

 Checkout
E - Elite Kids Adjustable Spreader Uneven Bars - AAI

Details 

For early skill development
    •  High bar adjusts in height from 60 5/8” to 75 5/8” (154cm to 192cm) in 3” (75mm) increments
    •  Low bar adjusts in height from 37” to 52” (94cm to 132cm) in 3” (75mm) increments
    •  Adjustable spreader locks low bar at three separate settings from 18 1/4” to 61 3/4”
    •  Fiberglass bars are covered in a wood veneer finish
    •  Accommodates 5’ x 10’ mat.
    •  Ships in 3 to 4 weeks. User weight limit 150 lbs.
    •  This is free-standing (no anchors are required.)
Unit price: $2,445 plus freight. -- Request a delivered price!
405-390
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

E - Elite Kids Double Handstand Bouncer - AAI

Details 

Made with the same quality materials and craftsmanship as AAI’s competitive equipment. Helps develop handstand position, pirouettes and hand placement
    •  Uprights measure 72” (183cm) with adjustments in 3” (75mm) increments
    •  Fiberglass bar is covered in a wood veneer finish
    •  Heavy-duty tubular steel uprights finished in powder coated orange gloss
    •  Accommodates 5’ x 10’ mat
    •  $2,380 + Freight.  Request a Delivered Price.
    •  405-382
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

E - Elite Kids Uneven Bars - AAI

Details 

ELITE™ KIDS GYM Uneven Bars Set comes with fiberglass rails covered with a wood veneer.

    •  High bar adjusts in height from 60 5/8’’ to 75 5/8’’ (154 to 192cm) in 3’’ (7.5cm) increments
    •  Low bar adjusts in height from 37’’ to 52’’ (94 to 132cm) in 3” (7.5cm) increments
    •  Unit is 75’’ (191cm) wide and 72’’ (183cm) deep
    •  Uprights are powder coated in an orange gloss finish with silver powder coated pistons
    •  Accommodates 5’ x 10’ mat
    •  $1,980 + Freight  Request a delivered price.
    •  405-356
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

F - Deluxe Grand Canyon Blocks

Details 

Because they are wider, the Deluxe Grand Canyon Bar Blocks offer increased stability and permit a narrower “canyon” than our very popular original Canyon Bar Blocks. Grand Canyon Bar Blocks include a special webbing fastening system that affords easier attachment to bars. All Grand Canyon Bar blocks are 34" wide and 52" wide. Three heights (12", 24" and 48") are available. Deluxe set consists of four 12", 24" and 48" blocks.

(Half stack which includes two blocks of each size as well as individual blocks are also available; please see listings for CB-205, CB-212, CB-224 & CB-248).
The Original & Grand Canyon Bar Blocks feature a combination of crosslink polyethylene/100 ILD polyurethane foam filler, ultra-durable 18 oz. covers and 4" wide hook and loop fasteners.
Available in royal blue, red or green.

 Deluxe Grand Canyon Bar Mats
CB-200 Deluxe Grand Canyon Bar Blocks (set of 12) $6,975
CB-205 Deluxe Grand Canyon Half Stack (set of 6) $3,524
CB-212 Grand Canyon Block (12") $335
CB-224 Grand Canyon Block (24") $525
CB-248 Grand Canyon Block (48") $920
Shipping is not included with the pricing above. Request a Quote
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

F - SA All American Spotting Platform

Details 

Designed for use on the SA All-American Uneven Bars, this allows coaches and spotters closer access to the athlete. 
The twin platforms automatically retract to their upright position by way of self-lubricating gas shocks. The platform itself can be locked at 180 degrees or angles to match the high upright tube on the uneven bar if needed (15 degrees either way). Maximum weight of 200 lbs per side. Platform is adjustable on the length of the upright tube.
$1,535 + freight
-- Request Freight Quote
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

F - Universal Spotting Platform - AAI

Details 

This platform can be used with SBT, UTB, Uneven Bars, Horizontal Bar & Ring Tower
  • Access to the platform steps and handrail is eased with a retractable assist step
  • When platform is not in use the self-retracting pistons slowly pull up the platform
  • Height of platform can be adjusted in height from 48" to 72" in 4" increments
  • Platform uses 4 anchors so it is self-supporting adding no extra weight or bind on the primary apparatus
    Anchors not included.
  • Normally ships in 3 to 4 weeks.
  • $1,585 plus shipping - Request a delivered price.
    407-690
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

G - Stall Bar Curved Pad

Details 

This new pad Curved Stall Bar Pad fastens to bars with four easily adjustable straps--two on top, two on bottom -- providing cushioning during stretching routines. Prime polyurethane foam filler is covered with durable 18 oz vinyl. These are estimated to ship in about 4 weeks currently.
SB-525
Price: $175.00
Add to cart

G - Stall Bar Pad

Details 

Attaches to the top of your stall bar with hook and loop straps, hangs down to pad stall bar for doing leg lifts. Vinyl cover is filled with 1 1/2" polyurethane.  48" long x 16" wide. Ships via UPS. Shipping is included in this price. Ships in 3-4 weeks. See the colors by clicking 'Details'. 
SB-515
Color Any (no preference)
Blue
Red
Green
Price: $107.00
Add to cart

G - Stall Bars

Details 

Build upper body strength the old-fashioned way with this updated gymnasium classic. Each Stall Bar Module is 8' high x 3' wide, constructed of solid ash and features 15 hickory rungs (1 3/8" in diameter). Lower rungs are spaced 5.5" apart. Top rung is 8" higher and offset 3.5" out from the others. Field assembly required. Mounting hardware will differ depending upon building construction and should be purchased from your local hardware. These usually take two to three weeks to ship. -- Request a delivered price!

SB-501

1 Section Motor Freight $592
SB-502 2 Sections Motor Freight $1,143
SB-503 3 Sections Motor Freight $1,714

Motor Freight is not included in these prices.

Learn more about Stall Bar Installation Here
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

H - Maximizers - SA (set of 4)

Details 

Maximizers are a mounting system that replaces your existing cable system on Unevens. They are the most effective way to increase usable floor space in your gym. Simple to install on SA Unevens, Maximizers save 40% of your conventional layout. In fact, they utilize little more than the space needed for matting.
Maximizers are recommended for permanent set-up. Bases are mounted to the floor for extra stability, so floor sockets are not required. Drawing shows (on Details page) comparison of floor space required for standard Uneven Bar floor sockets and the 40% space saving with Maximizers.
$1,065 + Freight Request Freight Quote
124
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

« | 1 | 2 | 3 | 4 | 5 | »

      Uneven Bars           Balance Beams            Vault          Pommel             Men's Bars             Rings             Misc. Equip
Property of The American Gym, a WinnMedia company, 2018 all rights reserved.
Home Preschool Gymnastics Gym Floors Mats and Pads Training Room Trampoline Related