The American Gym
Have Fun!
Check out the great buys on Tumbl Traks and trampoline equipment from the finest manufacturers!
    Search Store Contact Us
Gym Trampolines Tumbl Traks Tramp Accessories Inflatables

Tumbl Traks
Gym Trampolines
Inflatables

Pit Anatomy
Trampoline Accessories
Tramp Bed Types




 

 

 

 

 

 

Trampolines

Home » All Products

 Checkout
A - Competition Performance Series All-American Uneven Bars - SA

Details 

These revolutionary bars are designed to FIG dimensional specifications, while incorporating features for quick and easy adjustments. The pin lock, spring loaded adjusting tubes reduce pinch points when adjusting the uprights. The adjusting handle design allows you to make adjustments to the high bar without reaching over head or standing on a chair. Quick release machine screws allow for fast removal of the rail without removing the adjusting tubes. Bearing incorporated rail heads allow for ease of rail movement for longer rail life.
High Bar adjusts from 235cm (93") to 265cm (104") Low Bar adjusts form 155cm (61") to 185cm (73").
Width between rails adjusts from 90cm (35 1/2") to 210cm (82 3/4").
Cables attach to uprights allows bar adjustment without altering cable length.
Wood coated fiberglass rails "Carboflex" included.
Normally ships in 2 to 4 weeks.
Optional 6-Anchor cable system (5103-000) allows low bar to be removed and used as a stand alone high bar. 
Optional Spotting Platform also available (#5175).
5101-120 with Standard Cables $4,496 + Freight
5101-130 with ACSYS Cables $4,593 + Freight 
Request Freight Quote
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

A - Competition Performance Series Vaulting Table with Column Padding - SA

Details 

The most functional competitive table available!
The Performance Series Vault Table offers the widest range of height settings on the market with quick and easy adjustment. The vault is designed and built to FIG, USA Gymnastics, NCAA, NFHS, and AAU specifications. The Spring Vault adjusts from 100cm (39 3/8”) to 140cm (55 1/8”) in 5cm (2”) increments. Women's and Men's Competition Programs. Includes Upright Pads. Normally ships in 2 to 4 weeks.
  • Padded with a full 2" Rebound foam for repetitive training. 
  • Covered in camel colored non-slip basketball type textured fabric.
  • Easy height adjustment.  
  • The V-Groove Spinlock and Snaplock mechanisms provide fast, secure height adjustments. 
  • The vault's top has a more forgiving surface for repetitive training and greater repulsion.
  • The vault’s base design has easy leveling foot pads for better stability. 
  • Optional Base Pads: 4' x 4' x 20 cm $601; 4' x 8' x 20 cm $788; 4' x 4' x 12 cm $383; 4' x 8' x 12 cm $630 (Freight not included)
$3,769  + Freight Request Freight Quote
5002
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

A - Constant Tension Uneven Bars - AAI

Details 

The Constant Tension Bars (CTB) are designed to use for training and for lower level gymnastic programs, and now make it possible to keep tension while making width adjustments.

  • Footprint is reduced to only 7′ x 12′  from 13′ x 18′, which is 64% reduction in floor space
  • The top bar is adjustable from 92½” (2350 mm) to 102 5/8″ (2650 mm) in 50-mm increments.
  • The low bar is adjustable from 61” (1550 mm) to 72 7/8″ (1850 mm) in 50-mm increments
  • Bars are tensioned by six independent guying cable assemblies
  • Includes two Graphite E rails or Graphite X rails and six new, enhanced floor anchors
  • Coated in navy blue metallic powder coating
  • Chrome-plated pistons and uprights
  • Meets all FIG and NCAA® specifications
  • Includes anchors (requires 6)
Prod ID Product Name

Price

407-053 Constant Tension Uneven w/X Rails $4,665
407-073 Constant Tension Uneven w/E Rails $4,575
407-057 Constant Tension Uneven Conversion Kit $1,610

These prices do not include shipping. Request a delivered price.

Click on 'Details' or the photo to seem more detail! Normally ships in 2 to 4 weeks.

American Athletic, Inc. (AAI), is proud to announce that in September 2016, we received FIG approval (and certification) for the Graphite “E” Rail to be used during competition on our Elite Uneven Bar System (407-109).  The Graphite E Rail is made with less graphite strands than our Graphite X Rail allowing the gymnast a “softer” feel. The Graphite E Rail has been in use at the USA Gymnastics Junior Olympic level for approximately 5 years, and now is approved for use during all competition.

Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

A - Elite Artistic Vault Table - AAI

Details 

This AAI traditional vault table is used in competitions worldwide. (See more images by clicking on 'Details'.)
  • FIG Approved.
  • Meets USA, NCAA® and AAU competition specifications.
  • Vault body is constructed from a fiberglass form, layered with rebounding foam and covered with suede material.
  • Fitted vault base pad not included.
  • Four non-marking rubber floor contacts with adjustable leveling feet.
  • All options ship via motor freight - Please contact us for a shipping cost.
  • Normally ships in 3 to 4 weeks.
  • Base measures 36 1/2" (927mm) wide x 46" (1,168mm) long with the vaulting surface of 37 13/32" (950mm) wide x 47 1/4" (1,200mm) long.
  • Spin Lock and Snap Lock combo provide effortless height adjustments - from 37 1/2" to 53" (950mm to 1.350mm) in 50mm increments.

407-556

AAI Elite Artistic Vault Table with Fitted Pads 428 lbs $4,485
407-562 AAI Elite Artistic Vault Table with Club Pads 428 lbs $4,070
407-528 AAI Elite International Vault Head Only 126 lbs $2,335
407-568 Vault Base Weights 225 lbs. $765
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

A - Elite Kids Parallel Bars - AAI

Details 

Comes with fiberglass rails covered with a wood veneer.

    •  Bars adjust in height from 37’’ to 52’’ (94cm to 132cm) in 3’’ (7.5cm) increments
    •  Unit is 75’’ (191cm) wide and 72’’ (183cm) deep
    •  Uprights are powder coated in a orange gloss finish with silver powder coated pistons
    •  Accommodates 5’ x 10’ mat
    •  $1,970 + freight. Get a delivered price to your facility.
    •  Ships in 3 to 4 weeks.
405-359

Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

A - Elite Parallel Bars - AAI

Details 

AAI ELITE Parallel Bars are designed to accommodate the high stress of the athlete's most advanced routines.

  • FIG Approved. Meets USAG, NCAA and NFHS competition specifications
  • Width between bars is easily adjusted from 15" to 26" (28 to 65cm)
  • Height adjusts from 65" to 88-9/16" (165 to 225cm) in 5cm increments with quiet assist spring
  • Graphite II fiberglass-graphite composite bars, providing the feel of wood with the resiliency and strength of fiberglass composites
  • Constructed of heavy-duty steel bar mounting saddles with spring pin
  • Connection mechanism allows for 360 degree swiveling, which eliminates rattling and unnecessary movement
  • Powder coated navy vein finish, which resists chipping, fading and regular wear found in average finishes
  • Non-marking floor contacts with one adjustable leveling foot
  • Apparatus Tie-Down Set included

The parallel bar width can be adjusted by loosening the spin lock and turning the piston so that the gooseneck position changes. The bars will adjust in width from 15” (380 mm) to 26” (650 mm).

To adjust bar height, loosen the spin lock, disengage the snap lock and adjust the piston up or down. Make sure the snap lock is engaged completely and the spin lock is tightened before using the apparatus. The p-bars height adjusts from 65” (1650 mm) to 88 9/16" (2250 mm) in 50 mm increments. Always adjust all four pistons to the same height.

In order to maintain safe working conditions for the gymnasts, the coach or program director is responsible for performing periodic inspections of the apparatus.  Inspect for loose or damaged fasteners, other damaged parts or parts that have experienced excessive wear.  DO NOT USE damaged equipment.

These parallel bars are designed to meet all FIG, NCAA, and USAG requirements for competition. Normally ships in 3 to 4 weeks.
$5,555 + Freight Request Freight Quote
407-590

Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

A - Elite RA Balance Beam - AAI

Details 

This top of the line Reflex Adjustable Balance Beam is handcrafted, ensuring the highest quality and attention to detail. Beam is covered with a suede-like, slip-resistant material.
FYI - A reflex beam is a beam with an inner spring which provides the athlete with the appropriate amount of shock absorption and rebound which returns the energy to the gymnast.
  • FIG approved
  • Meets FIG, USAG, NCAA and NFHS competition specifications
  • Accommodates FIG, USAG, NCAA and NFHS mat specifications
  • Unique 1/4" composite pad provides a firm yet forgiving surface
  • Height adjusts to 100, 110, 120 and 125 cm
  • The urethane spring is designed for repeated impacts without losing any of its energy absorbing properties
  • Powder coated navy vein finish resists chipping, fading and regular wear and tear found in average finishes
  • Padded end caps for additional protection
  • Beam dimensions: 16'5" long x 4" wide
  • Weight 371 lbs
  • Normally ships in 3-4 weeks
    407-440  -- Price $3,855 + motor freight  
    Request Freight Quote
See a comparison of AAI Beams here.
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

A - Elite RNA Balance Beam - AAI

Details 

This top of the line Reflex Non-Adjustable Balance Beam is handcrafted, ensuring the highest quality and attention to detail. Beam is covered with a suede-like, slip-resistant material. 
FYI - A reflex beam is a beam with an inner spring which provides the athlete with the appropriate amount of shock absorption and rebound which returns the energy to the gymnast.
  • FIG approved
  • Meets FIG, USAG, NCAA and NFHS competition specifications
  • Accommodates FIG, USAG, NCAA and NFHS mat specifications
  • Unique 1/4" composite pad provides a firm yet forgiving surface
  • Height is fixed at the FIG competition height of 125 cm
  • The urethane spring is designed for repeated impacts without losing any of its energy absorbing properties
  • Powder coated navy vein finish resists chipping, fading and regular wear and tear found in average finishes
  • Padded end caps for additional protection
  • Beam dimensions: 16'5" long x 4" wide
  • Weight 362 lbs
  • Normally ships in 3-4 weeks
    407-430  -- Price $3,390 + motor freight  
    Request Freight Quote
See a comparison of AAI Beams here.
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

A - Elite Uneven Bars - AAI

Details 

AAI’s ELITE™ Uneven Bars are made with highly engineered materials to ensure longevity and withstand many years of competition and training.
  • FIG Approved
  • Meets USAG, NCAA and NFHS competition specifications
  • New rod ends provide a more consistent performance with reduced  wear on the rail collar
  • Dual slide collars allow unit to exceed FIG bar-to-bar width specifications, adjusting from 95cm to 192cm
  • Low bar adjusts in height from 61” (155cm) to 73” (185cm)
  • High bar adjust in height from 93” (235cm) to 104” (265cm)
  • Dual snap and spin lock systems provide optimum height accuracy and security
  • Graphite X Rails provide the feel of wood with the strength and resiliency of fiberglass for maximum performance
  • Heavy-duty pistons designed to provide added stability and performance
  • Easy to adjust cabling system for enhanced stability
  • Bases and spreader links finished in powder coated navy vein
  • Includes two Assist Steps (407-059)
  • Can be used with the Freestanding Uneven Bar Adapter and/or SRS System
  • Includes four cable covers
  • Unit requires four floor anchors (not included)
  • 407-080 (with Graphite X Rails) $4,535 + Motor Freight

> Also available with Graphite E Rails. (407-109) $4,535 + Motor Freight

American Athletic, Inc. (AAI), is proud to announce that in September 2016, we received FIG approval (and certification) for the Graphite “E” Rail to be used during competition on our Elite Uneven Bar System (407-109).  The Graphite E Rail is made with less graphite strands than our Graphite X Rail allowing the gymnast a “softer” feel. The Graphite E Rail has been in use at the USA Gymnastics Junior Olympic level for approximately 5 years, and now is approved for use during all competition.

Normally ships within 3 to 4 weeks.

Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

A - Ergojet Vaulting Table - SA

Details 

The Ergojet Vaulting Table by Spieth Germany has a design that is ideal for Elite level clubs and competitions. Optional Base Padding available. The Table's height smoothly adjusts from 100cm (39 1/3") to 140cm (55 3/25"), in increments of 2" using a gas spring system. The surface consists of 2-fold fiberglass reinforced plastic and an integrated resilience system. Special cushioning in front and safety padding on the base offers optimum impact protection. A built-in transport system makes it easy to move the table. Floor space required: 110cm (43 3/10") x 94cm (37"). FIG Approved.

Optional Base Pads: 4' x 4' x 20 cm $601 (shown); 4' x 8' x 20 cm $788; 4' x 4' x 12 cm $383; 4' x 8' x 12 cm $630 (Freight not included)
$5,138 + Freight Request Freight Quote
1407210
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

« | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »

 

Gym Trampolines Tumble Tramps Tramp Accessories Inflatables

© Property of The American Gym, a WinnMedia company, 2017 all rights reserved.

 

Home Preschool Gymnastics Gym Floors Mats and Pads Training Room Trampoline Related