We offer two traditional sizes of pit rectangular trampolines - 6' x 12' and 7' x 14'. We can also customize a size to meet your needs. This style is sometimes referred to as 'Angle Iron' Trampolines. The trampoline beds are made with 100% black polypropylene fabric, or we can supply it with a High Performance (HP) bed or String Bed (additional charge). You can also use string beds and jumbo springs with these units. This style of  trampoline can be used indoor as well as outdoor.  

Frame
> Angle Iron construction.
> 1/4" round rod zig zag wire welded on for spring attachment.
> Predrilled holes, staggered on top and side for pit attachment.
> Bolt package for anchoring your pit trampoline into concrete.
Springs
> 9" high quality spring is standard.
> Can customize to your choice of spring size.
Beds
> 100% black Polypropylene fabric, great for indoor as well as outdoor use. Other options are available (see below).
> Spring attachments have double webbed configuration for added strength.
> Corner spring attachments for added safety.
> Other types of beds available - Aussie String Beds or High Performance Beds for additional charge. HP Poly bed is not sold for residential use.
Pads
> Complete with a full pad covering frame, springs and corners. Pads are blue. Other colors are available for $50 more - red, green, yellow, gray.
> 1 1/8" thick cross-link foam covered in heavy duty blue vinyl.
> Attaches to frame with Velcro.

Pit Size: If using 9" springs, the pit should be: 8' 2" x 14' 2" for 6' x 12'  or  9' 2" x 16' 2" for 7' x 14'. Depth: 40" for Poly bed, 42-44" for String or HP bed. These are minimum recommendations. You can go deeper.

You can buy these online. Choose the size, bed type that applies:

This trampoline can be used as a free-standing, indoor or outdoor or as a great solution for an inexpensive, easy-to-install quality inground trampoline. We offer two sizes of this rectangular trampoline -- 6' x 12' and 7' x 14'. You can also choose from the Standard Poly Bed, The HP Bed (for gym use only), or the Aussie String Bed (required for competition use). High quality 9" springs. All-around 1 1/4" crosslink padding is included (velcros on). There are two springs in each corner supporting the pads - not just on the sides. 40" legs. Frame is made of 11 and 12 gauge powder-coated steel.

These free standing trampolines can be placed directly in a 40" deep pit if you want it to be at ground level. (You may want to make the pit be 2" to 4" deeper if you will be choosing the HP Poly Bed or String Bed.) You can increase your bounce by leaving the tramp 4" to 6" above the ground (pit depth of 34" to 36"). This allows better air flow and therefore better bounce. For a 6' x 12', the pit should be 9' 6" x 14' 9"; for 7' x 14', the pit should be 10' 6" x 16' 9". If you intend to place this unit outdoors in a pit, we suggest you contact a landscape contractor to make sure you have proper drainage and wall support for your soil type.

These prices do not include shipping. The shipping charge for a commercial location is $200. For a residential location the charge is $250. The shipping is added once you choose the location, size and type of bed. Note: Only the Poly beds can be delivered to a residential location. The HP and String beds are intended for commerical use - with supervision.