Spring Floors 101
Foam & Carpet
Request a Price!
Floors 101 - What You Need to Know
you are considering the purchase of a Spring Floor for gymnastics,
cheer, or martial arts, there is some basic information
you need to know to make sense of the terminology you will
find. A great place to start is studying the diagram to
Most spring floors are composed of some combination of four separate
parts - Springs (and hardware for attachment), Plywood,
Foam and Carpet (or the combination of them). Each of these
choices will dramatically affect the price and performance
of your floor.
is a difference in Springs generally offered. At the left
are two of the best, though there are several others.
When you compare flooring systems, be sure you take note of
the type of spring you will receive. The Palmer Power Spring and the American Power Spring™ are similar. Both features a durable, oil-tempered 2"
x 4" coil with plastic retainer caps (top
and bottom) that assure vertical alignment. We feel that the American Spring's coil has a preferrable coating and the caps have a more robust retention system. The American Power Spring's caps (top and bottom) are interchangable. The Palmer Springs are not. The cost is the same for either. The American Springs also ship far more quickly. Both is sold with the t-nut, washer and screw for attachment. The t-nuts are applied to drilled 1/4" holes in the top of the bottom boards.
The top caps are attached to the 3/8" (or 9mm) to 1/2" Baltic Birch
Plywood with a washer and screw secured to the t-nut. The Springs fit snugly in the caps. The Spring's
bottom caps at put in place - these sit directly on the concrete. There is generally
one spring per square foot. Some vendors
offer floors with foam blocks instead of springs or a combination
of both. Remember that foam block will wear out (lose its height)
far quicker over time under that constant weight, than springs.
So, for longevity, consider springs. Attached to this (usually with velcro) is the top layer - generally 3/8"
(or 9mm) Baltic Birch. These two layers are staggered so that
your floor's response is uniform. The wood part of your floor
is not always sold with kits, so be sure you know what you are
getting. The wood decking is the most important aspect
in the life expectancy and performance of your floor.
you like, you can purchase your wood from a local lumber yard
(i.e., Home Depot, Lowe's, 84 Lumber, etc.), but beware.
The quality, thickness and type of wood do make a tremendous difference.
Most suppliers of quality spring floors are using the Baltic Birch
(sometimes called Russian Birch). A 1/2" BS Fir Plywood
can be used if you have difficulty
finding the birch. OSB (Oriented Strand Board) tends to break more easily - especially in the thinner dimensions required to be able to engage the springs. You may contact a local cabinet manufacturer
who may be able to obtain the Baltic Birch. It will provide superior
strength and longevity for your floor. If you opt to go thicker
it will become less likely that the springs are engaged during
activity - especially for lighter tumblers. You can purchase a Assembled Spring Floor, like those sold here,
where the springs are already mounted on the optimal wood for
spring floors. Some manufacturers offer floors in 4' x 8' panels,
but most of the leaders in the field have gone to 5' x 5' panels,
as we have. They are much easier to ship and handle. Of course,
some of the panels will need to be cut to make any given size of floor. This we do for you. So you just have to set them down in sequence in your facility - no tools are needed.
then cover the decking with foam and carpet. There are
two routes to choose from here. You can get the Foam separately
and then purchase carpet to place over it. The much less
expensive and simplest route is to get what is known as
Carpet Bonded Foam (or Flexi-Rolls®).
This is a carpet that is laminated to (usually) a Trocellen
Foam making the top two layers one piece (see right).
It is a remarkably durable product. (For more on these
Cheer Floors.) Carpet
Bonded Foam or Flexi-Rolls® come in several colors.
Colors other than basic royal blue usually cost a bit
is by far the most common floor covering in the US today.
Many gyms and schools use it without a spring floor as
normally comes in 1 3/8" or 2" thicknesses.
EVA Enhanced versions of these rolls are also available.
If you go the route of foam and separate carpet, this is
a more expensive way but makes for a more beautiful floor.
The foam (usually Trocellen) is available in the same
1 3/8" or 2" thicknesses. There is also a EVA
Enhanced Trocellen which is more expensive but has better
response. It usually comes in 1.75" or 2.25"
thicknesses. There are many different colors of carpet
available. You will find that royal blue is the least
expensive and most readily available. The carpet is shipped
in usually 3 or 4 segments (depending on the size of your
floor). You will need the velcro belts to attach to the
carpet segments. These join the segments under the carpet.
Many dealers will price these essentials separately. To
avoid surprises, make sure this is included in your pricing.
Carpet Bonded Foam
(2" shown here)
you choose the foam with a separate carpet option, tapered
foam borders are an option for completing your floor.
They allow a gradual transition to floor level (see right).
Usually the angled border extends about 12" from
the decking. This is the sharpest (and most expensive)
of your options. This is top-of-the-line and is what you
will see at all the major gymnastics competitions.
you are leaning toward going Carpet Bonded Foam or Flexi-Rolls®
to top-off your floor, you may consider using a Vinyl Floor
Skirting. This product velcros to the top of your CBF and hangs
to the floor, hiding the wood, springs, etc. and providing a nicer
look. This is used to enhance the safety and appearance of the
floor (no exposed wood or springs). It also prevents
things from rolling under the flooring and prevents "dust
bunny" habitats. Other options include an Angled
Carpet Bonded Border.
You can check out this and other options on our
When you are shopping for a spring floor, read carefully what
the provider offers. Some "Kits" come with just the
springs or springs and velcro. Others will be wood, spring and
velcro - but you will need to cut, drill and attach the springs.
A standard spring floor will assemble in approximately 30 hours
with instructions geared towards the booster club production line
(this depends largely on how many workers you have). If you get
a Mounted Spring Kit, you can cut that time to just an hour or
so. We think this is the way to go.
For flooring systems, we recommend (and
provide) 3/8" (or 9mm) Baltic (or Russian) Birch over the
same 3/8" (9 mm) Baltic Birch. (The American Gym is the largest single user of this material in the United States.) We have found that it provides
a lively, fast and durable floor for tumblers from 60 to 200+
pounds. This also creates happy coaches. OSB, we have found, is
a good product but does not supply the longevity of Baltic Birch
and tends to break easily - especially in the thinner panels.
We will be glad to furnish you with a price for your floor (or
strip). Just let us know what you have in mind. We can produce
any size. Just remember that the foam product required usually
comes in 6' widths. So, you might want to keep one dimension divisible
spring floors are not created equal.
Though many manufacturers use the same or similar materials,
the difference can be dramatic.
example, notice, below, the amount of velcro attached
to this (springed layer) floor provided
by a competitor:
to a TAG floor:
We use 8 times more
velcro than some competitors -- which provides better hold, resulting in a quieter,
more stable floor. This floor is more resistant to warpage,
providing a much longer life for your investment.
here to see how we supply floors!
Landing Pits 101